Sign In | Join Free | My
GuangZhou TianYuTong AUTO Parts CO.,LTD
GuangZhou TianYuTong Auto Parts CO.,LTD
Home >

GuangZhou TianYuTong AUTO Parts CO.,LTD Quality Info

Quality Control

Complete Injector Cleaning & Flow testingr.

Our 11 Stepprocess includes the following:
1) Injectors are externally cleaned, visual inspected, and numbered.
2) Test injectors for resistance, shorts, and current draw.
3) Perform leak test, spray pattern, resistance while operating, and flow testing, (both pulsed and static), on one of our flow benches. Our modified test machines are set up specifically for various types of injectors. The test results are recorded.
4) Remove filter baskets, o-rings, pintle caps, etc. Bead-blast paint and rust from the metal injector body.
5) The injectors are placed in our first ultrasonic cleaning tank to remove any particles, grease, etc from the exterior that may contaminate the next two cleaning processes.
6) Into the second temperature controlled ultrasonic tank they go, the injectors are now cycled on and off allowing the ultrasonic energy to dislodge any particles and build-up inside the injectors.
7) The injectors are now placed in our third ultrasonic tank for additional cleaning using a different cleaning solution. Once again they are being cycled on and off while being cleaned. This three tank, two cleaning solution cleaning process insures that any particles or contaminates are removed.
8) A high pressure back-flush is now done to remove any remaining particles inside.
9) Back to the flow bench for retesting of spray pattern, flow rate, coil resistance, and leak checking. If any injectors still are not flowing well, they will go back through the cleaning process and retested as many times as needed. This test data is also recorded.
10) Install new filter baskets, o-rings, seals, and pintle caps (where applicable)
11) Prepare a comprehensive test report with before and after test data. The injectors are then packed along with the old parts for return.


GuangZhou TianYuTong AUTO Parts CO.,LTD Certifications
Standard: ISO
Number: 57503425-2
Issue Date: 2016-01-21
Expiry Date: 2019-02-20
Scope/Range: Development and Production of Mould,Production of Injection Molding Parts
Issued By: China Compulsory Certification
GuangZhou TianYuTong AUTO Parts CO.,LTD Certifications
Standard: CCC
Number: 2011010911486602
Issue Date: 2011-10-09
Scope/Range: Auto and motorcycle parts
Issued By: China Compulsory Certification

Company Profile

GuangZhou TianYuTong AUTO Parts CO.,LTD

Contact Person: MrNiko

Send your message to this supplier
To: GuangZhou TianYuTong AUTO Parts CO.,LTD
Characters Remaining: (0/3000)